Page
9
WMi1010 user manual.doc
FITTING DÉCOR DOOR
Make holes on the wooden door according to the instructions enclosed with the machine.
•
Take hinges (A) out of the bag and fix them to the door.
•
Take jack (B), its support (C) and fix one to the other by means of screws (G).
•
Install hinges (A), jack (B) and separator (E) to the door.
•
Fix stopping hook (D) to front panel of the washing machine by means of screws (F).
•
Insert caps (H) into the holes, as shown in the figure.
•
Make holes into the base and fix magnets (L).
DOOR OPENING REVERSAL
To open the door from left to right, follow the instructions by turning the position of the
holes. If the machine is to be fitted underneath a work surface and the distance that the
appliance needs to be raised is greater than 10 mm, then a solid one-piece baseboard
should be used.
