Caple WI6226, Instruction Manual

Page: 7 / 13

Note
•
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart it before this time delay, the wine cabinet will not
start.
•
When you use the wine cabinet for the first time or restart the cabinet after having been shut
off for a long time, there could be a few degrees variance between the temperature you select
and the one indicated on the LED readout. This is normal and it is due to the length of the
activation time. Once the wine cabinet has been running for a few hours everything will be
back to normal.
Using the shelves
•
To prevent damaging the door gasket, make sure you have the door fully open when pulling
shelves out of the rail compartment.
•
For easy access to the storage content you must pull the shelves approximately 1/3 out of the
compartment, however this unit is designed with a notch on each side of the shelf tracks to
prevent bottles from falling.
Removing or installing shelves
•
When removing any of these shelves from the rail compartment tilt the shelf as per the
diagram below and simply pull it out, or to install a shelf push it in until it sits on the support
brackets securely.
6