Instruction manual Wi6160
Please keep this instruction manual for future reference
22
HOW TO INSTALLTHE
FURNITURE DOOR
1. Fully open door.
2.
Starting at
the
corner, pull
the
gasket away from
the
door. As per Fig A.
3.
Continue to pull
the
gasket free from
the
gasket channel.
4. Upon removal, lay gasket down on a flat surface.
5.
Secure
the furniture door
panel to
the appliance
door using clamps
(see Fig. B)
.
6.
Using a 3 mm drill bit, drill 6 pilot holes into the wood panel 12 mm deep using
the holes in the
door frame as a guide.
NOT
E:
It is important to ensure that all drilled holes are drilled to the correct depth in order
to avoid splits in the wood when hardwood is installed.
You must also take care not to drill all
the way through the door.
7. Locate 6 of the M4x34 mm screws provided with your unit.
8. Using a Phillips screwdriver, place one screw into each of the 6 pilot holes and screw
into the
door, as per Fig C. Be careful not to
over tighten screws.
9.Ensure the screws sit flush against the bottom of the channel. Remove clamps from door.
NOTE:
If panel requires additional adjustment after removing clamps, slightly loosen each
screw and adjust panel as necessary. Tighten screws upon completion.
10
.
Starting at the corners, re-install the gasket into the gasket channel in the frame
, by pushing firmly
into place.
Make sur
e the gasket is fully seatedinto the channel.
Appliance door
Furniture door
Bar clamp
NOTE:
If a handle is required, please ensure this is installed in an appropriate position before the
furniture door is installed.
Furniture door
Wi6160 Wine Cabinet Instruction Manual.indd 22
25/09/2018 16:03
