Instruction manual Wi6133
Please keep this instruction manual for future reference
8
INSTALLATION
Before using your wine cabinet
- Remove the exterior and interior packing.
-
IMPORTANT
: Before connecting the wine cabinet to the power source, let it stand
upright for at least 12 hours. This will reduce the possibility of a malfunction in the
cooling system from handling during transportation.
- Clean the interior surface with lukewarm water using a soft cloth.
Before installation, turn the unit off and unplug it from the outlet.
NOTE
To protect the appliance in transit and delivery the door is packed tightly against the
cabinet. When first installed this can mean the door seal appears thinner on one
side of the door due to compression, this is normal and once out of the box it will
relax over a short period of time and the door will return to the normal position. If
you wish to speed up the process you can gently warm the seal with a hair dryer on
a low temperature setting. This can help relax the seal helping it return to normal
thickness a little faster.
INSTALLATION OF YOUR WINE CABINET
- Place your wine cabinet on a floor that is strong enough to support it when it is
fully loaded.
- To level your wine cabinet, adjust the front levelling leg at the bottom of the
cabinet.
- Ensure it is perfectly level, as this will minimise any vibrations.
- This appliance uses flammable refrigerant. Never damage the cooling pipework
during transportation.
- Locate the wine cooler away from direct sunlight and sources of heat (ovens,
hobs, heaters, radiators, etc.). Never clean appliance parts with flammable fluids.
The fumes can create a fire hazard or explosion. When disposing your appliance,
please choose an authorized disposal site.
- Avoid locating the unit in moist areas.
- It is fitted with a power cord having an earth wire terminating in a 13amp plug.
- Ensure the product is correctly ventilated (see page 14 & 15).
