Instruction manual Wi6133
Please keep this instruction manual for future reference
12
Internal light
In order to reduce energy consumption, the LED light within this wine cabinet will
automatically switch off after 10 minutes. If you would prefer the LED light to
remain on continuously, this is possible. Please press and hold the
4
4
key for 5
seconds, the display will show “LP”. After 4 seconds the display will revert back to
normal and the light will remain on until manually switched off.
If you would like to revert back and conserve energy (recommended), press and
hold the key for 5 seconds, the display will show “LF”. After 4 seconds the
display will revert back to normal, and the light will automatically switch off after 10
minutes.
USING THE SHELVES
To prevent damaging the door gasket, make sure to have the door opened fully
when pulling shelves out of the rail compartment.
For easy access to the storage content, you must pull the shelves approximately 1/3
out of the rail compartment, however this unit was designed with a notch on each
sides of the shelf tracks to prevent bottles from falling.
Removing or installing shelves
To install or remove a shelf, tilt the shelf as per the diagram and simply pull out, or
push in the shelf until it sits on the support brackets securely.
Visit our Caple website to view a ‘How to video’ on this.
www.caple.co.uk
4
4
Internal light
In order to reduce energy consumption, the LED light within this wine cabinet will automatically
switch off after 10 minutes. If you would prefer the LED light to remain on continuously, this is
possible. Please press and hold the "LIGHT" button for 5 seconds, the display will show "LP". After
4 seconds the display will revert back to normal and the light will remain on until manually switched
off.
If you would like to revert back and conserve energy (recommended), press and hold the "LIGHT"
button for 5 seconds, the display will show "LF". After 4 seconds the display will revert back to
normal, and the light will automatically switch off after 10 minutes.
Using the shelves
•
To prevent damaging the door gasket, make sure to have the door opened fully when pulling
shelves out of the rail compartment.
•
For easy access to the storage content, you must pull the shelves approximately 1/3 out of the rail
compartment, however this unit was designed with a notch on each sides of the shelf tracks to
prevent bottles from falling.
Removing or installing shelves
•
To install or remove a shelf, tilt the shelf as per the diagram and simply pull out, or push in
the shelf until it sits on the support brackets securely.
•
Visit our Caple website to view a 'How to video' on this. www.caple.co.uk
6