How to change the door opening
This appliance has reversible doors but is delivered with a right hinged door. The left hand hinge
kit comes with the unit (in the box), should you wish to reverse the hinge on your unit.
1. Lower hinge (Right)
2 . Screws
3 .Door axis
4. Door
5. Top hinge (Right)
6. Hinge Screws
7. Top hinge (Left)
8. Decorative nail
9. Lower hinge (Left)
10. Door limit device
11. Screw
12. Plug
1.
Open the door 90 degrees and take out 2 screws (2) from the lower door axis (3), remove the door
(4), then pull out the door and door axis (Fig. A).
2.
Store the door (4) safely and take out the plug (12) from top of door frame, unscrew 1 screw (11)
at bottom and remove the door limit device (10), then install
the
Door limit device (10) at top of
door frame, please use spare plug (12) to block the hole at the top of door frame. (Fig. A/B)
3.
Take out 3 hinge screws (6) from the top hinge (right) (5) and remove it. (Fig. C)
4.
Remove decorative nail (8) from the top left of the cabinet and install the spare top hinge (Left) (7)
at left top of cabinet with 3 screws. (Fig. D)
5.
Following the above procedure, install the spare lower hinge (left) (9). (Fig. E)
6.
Turn the door 180 degrees, install the door the same way it was removed and fix it once the door
has been aligned.
7.
Block the holes in the top right of cabinet with the spare decorative nails (8).
7
