5
•
Remove 3 screws
•
of right upper Hinge, then remove right upper
•
& Right lower hinges
•
; (See
fig.C)
•
Use the screws which you removed From right side hinges to fix left upper & bottom hinges
••
(See Fig.D & Fig.E)
•
Rotate door at 180 degrees then assemble the door as per the reverse way of removal
Install the bar handle
Remove the door gasket on the drilling holes side to install the handle. (see below
drawing)
Back
Front
Fitting a kitchen plinth
These models are recessed to fit a kitchen plinth. A H50mm vent slot is required in the plinth to ensure air is
able to ventilate correctly.
See diagram below.
Failure to include this vent slot will invalidate the guarantee.
