Caple WI152, Technical Information

Page: 9 / 27

5/23
service part worsen.
When measuring the grounding resistance make sure that the test range is more than
1MΩ.
Make sure the power cord and plug never be pinched on rear of the wine cooler.
Exchange the power cord when it damaged.
Clean the flake of the plug when it dirty.
Notice
·Attention the hot.
The running or just stop compressor and the pipe sometimes are very hot. And the
heating or just stop heater is very hot. The hot will cause scald.
·Attention the hot parts of the pipe after the welding.
·Attention the refrigerant during charge and discharge it, as it will frostbite the skin
when touch it.
·Attention the burr.
The burr on the metal or plastic part may hurt the hand.
·Attention the fins of the evaporator.
The fins of the evaporator may hurt the hand.
·Drive up the wine cooler when moving it. Pushing it may damage the floor. Cover a
protector board on the easy damage floor.