Caple WI152, Technical Information

Page: 16 / 27

12/23
Remove the screw on the back of the control box, pull out the control panel, disconnect the
connectors, remove the control box. ( Fig.4)
6.1.6．How to remove the main PCB.
The process: Remove the shelves → remove the control box → remove the main PCB.
After removing the control box, press the nail one by one and pull the PCB upward, remove the main
PCB. (Fig.5)
Diagram and explanation of the main PCB (Fig.6)
X1: Inner sensor(white) X11: Defrost sensor(red) X13: Power PCB (white)
X14: LED light (red) X2: Inner fan (white)
Screw
Fig.5
Fig.4
Nails
Fig.6