5
•
Bottom hinge (Right)
•
Screws
•
Door axis
•
Door
•
Top hinge (Right)
•
Lock screws
•
Top hinge (Left)
•
Bottom hinge (Left)
•
Remove 2 screws •, then pull door
•
as per arrowhead direction and you will remove the door.
Please remove bottom hinge (Right)
•
as well for the assembly. (Fig.A & Fig.B)
•
Remove 3 screws
•
of right upper Hinge, then remove right upper
•
& Right lower hinges
•
; (See
fig.C)
•
Use the screws which you removed From right side hinges to fix left upper & bottom hinges
••
(See Fig.D & Fig.E)
•
Rotate door at 180 degrees then assemble the door as per the reverse way of removal
Install the bar handle
Remove the door gasket on the drilling holes side to install the handle. (see below
drawing)
Back
Front
DEFROSTING/CONDENSATION
Your wine cabinet is designed with an “Auto-cycle” defrost system. When the RUN cycle is OFF, the
refrigerated surface of the wine cabinet (interior rear wall) defrosts automatically. The defrost water
is channeled into a drain pan which is located at the back of the wine cabinet next to the
compressor from where it evaporates.
