Instruction manual WDU060, WDU080 & WDU125
8
Please keep this instruction manual for future reference
SUPPORT RING
CUSHION MOUNT
MOUNT RING
SINK FLANGE
SINK FLANGE
GASKET
FIBER GASKET
* REMOVABLE SPLASH
GUARD
3A
I N S T A L L A T I O N O F M O U N T I N G A S S E M B LY
R E A D C O M P L E T E LY B E F O R E S TA R T I N G
N O T E :
Pay close attention to the order of mount assembly
parts, as they have been correctly assembled by the
factory (see 3A). Also, reference the cushion mount
detail in illustration 3G for the proper position of the
cushion mount.
Try practicing this assembly before you get under the
sink to get the “feel” of how the parts fit together.
› Disassemble mount assembly from disposer
by turning mount ring to the left (clockwise) and
remove.
› Raise mount ring toward top of sink flange. Remove
cushion mount. Remove mount ring. You may want
to practice installing the cushion mount at this point
before you are under the sink. See the “Important
Notice: Cushion Mount Detail.”
› Unscrew support ring from sink flange and remove
fibre gasket. You are now left with sink flange and
rubber gasket.
› The rubber gasket is used instead of plumbers putty
or silicone with stainless steel sinks. Other sinks may
require putty or silicone.
› If no putty or silicone is used, insert sink flange
through rubber gasket into sink opening. Do not
rotate sink flange once it is seated.
SINK
FLANGE
SINK
SCREWS
DISCHARGE ELBOW
RUBBER SINK
FLANGE GASKET (OR
PUTTY)
FIBER GASKET
SUPPORT RING
(NOTE ARROWS
INDICATING UP)
REMOVABLE
*SPLASH GUARD
MOUNT RING
TIGHTENING EARS
CUSHION MOUNT
GROOVE
ELBOW GASKET
DISHWASHER
INLET
ELBOW
FLANGE
HOPPER
RESET BUTTON
(FRONT)
* STOPPER
3B
3C
