Instruction manual WC1792 & WC1796
14
Please keep this instruction manual for future reference
S H E LV E S
To prevent damaging the door gasket, make sure to have the door fully opened when pulling
shelves out of the rail compartment.
To remove the shelves:
1. Fully extend the shelf you wish to remove (Fig. A)
2. Lift the front of the shelf up (Fig. A)
3. Holding the shelf runners, push the shelf in, then up to release from the rear dampers (Fig. B)
C AU T I O N
Do not store bottles horizontally on the interior floor. Otherwise, bottles may fall out when the
appliance door is opened and this may cause injury or material damage.
6
Storage diagram
Shelves
•
To prevent damaging the door gasket, make sure to have the door fully opened when pulling
sh elves out of the rail compartment.
•
For easy access to the storage content, you must pull the shelves approximately 1/3 out of
the rail compartment, however this unit was designed with a notch on each sides of the
shelf tracks to prevent bottles from falling.
•
When removing any of these shelves out of the rail compartment, tilt the shelf as per the
diagram and simply pull out, or push in the shelf until it sits on the support brackets
securely.
COUTION
！
Do not store bottles crossways on the interior floor!
Otherwise, bottles may fall out when the appliance
door is opened and this may cause injury or material
damage.
