background image

9

Please keep this instruction manual for future reference 

Instruction manual SP612 / SP912 

E N V I R O N M E N TA L   P R OT E C T I O N    

Waste electrical products should not be disposed of with household waste. Please recycle where 
facilities exist. Check with your Local Authority or retailer for recycling advice. This appliance is 
marked according to the European directive on Waste Electrical and Electronic Equipment (WEEE).

By ensuring this product is disposed of correctly, you will help prevent potential negative 
consequences for the environment and human health, which could otherwise be caused by 
inappropriate waste handling of this product. The symbol on the product indicates that this 
product may not be treated as household waste. Instead it shall be handed over to the applicable 
collection point for the recycling of electrical and electronic equipment. Disposal must be carried 
out in accordance with local environmental regulations for waste disposal.

For more detailed information about treatment, recovery and recycling of this product, please 
contact your local council, your household waste disposal service or the retailer where you 
purchased the product

WA R R A N T Y 

Your new appliance is covered by warranty. The warranty card is enclosed - if it is missing, you 
must provide the following information to your retailer in order to receive a replacement: date of 
purchase, model and serial number. Registration can also be completed online by visiting 
www.caple.co.uk.

Ensure you keep your warranty card safe, you may need to show it to Caple Service together with 
proof of purchase. If you fail to show your warranty card you will incur all repair charges. 

Spare parts are only available from Caple Service and spare parts authorised centres.

C E   D E C L A R AT I O N S   O F   C O N F O R M I T Y    

This appliance has been manufactured to the strictest standards and complies with all applicable 
legislation, Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC).

U K C A   D E C L A R AT I O N S   O F   C O N F O R M I T Y  

 

This appliance has been manufactured to the strictest standards and complies with all  
applicable legislation.

T E C H N I C A L   F I C H E

This appliance conforms to all current and applicable energy regulations. To view the Technical 
Fiche that supports the energy labelling data, please visit the product page on our  
website www.caple.co.uk

Summary of Contents for SP612





















Reviews: