Instruction manual SP611 / SP911
Please keep this instruction manual for future reference
15
Levelling device
- When mounting the hood on the wall, the level can be adjusted by turning the
two screws on the motor housing.
650 -760mm
1200 - 1700mm
Installation alternatives
- The cooker hood can be installed in the following ways:
- Circulating indoor air (A) or outdoor venting (B)
Important
- If a two-part connection tube is used, the lower section must sit outside the
upper section.
- Do not connect the cooker hood exhaust to a duct used to circulate hot air or
vent steam from another appliance.
- Always use protective gloves when installing the appliance.
SP611BK-SP911BK - Instruction Manual.indd 15
22/03/2016 15:02
