10 Instruction manual Oi363
Please keep this instruction manual for future reference
I N S T A L L A T I O N
Before installing the appliance, make sure that none of the parts are damaged in any way. In
case of damaged parts, contact your retailer and do not proceed with installation.
Read all of the following instructions with care before installing the appliance:
› If venting the hood, use an air outlet pipe of the shortest possible length.
› Limit the number of pipe bends.
› Use a duct of recognised and approved material.
› Avoid any abrupt changes of direction and use a duct with a diameter of 150mm constant
over the entire length.
N O T E :
For more information on venting, please see our ‘Extraction & Ventilation guide’ available at
www.caple.co.uk
ATTENTION: AT LEAST TWO PEOPLE ARE NEEDED TO PERFORM THE INSTALLATION.
Before installing the appliance, in order
not to damage the appliance itself, the
metal grease filter should be removed.
This can be removed by pushing the
special filter handle toward the back
side of the cooker hood and pulling it
downwards so to unfasten it from its slot
(Fig.3).
Before fixing the hood, place the electric
feed correctly into the ornamental tube
and create a hole for air evacuation if
installing in vented/ducted mode.
INSTALLATION
Before installing the appliance, make sure that none of the parts are damaged in any
way. In case of damaged parts, contact your retailer and do not proceed with installation.
Read all of the following instructions with care before installing the appliance:
- If venting the hood, use an air outlet pipe of the shortest possible length.
- Limit the number of pipe bends.
- Use a duct of recognised and approved material.
- Avoid any abrupt changes of direction and use a duct with a diameter of
150mm
constant over the entire length.
NOTE:
For more information on venting, please see our ‘Extraction & Ventilation guide’ available
at
www.caple.co.uk
ATTENTION: Atleast two people are needed to perform the installation.
Before installing the appliance, in order
not to damage the appliance itself, the
metal grease filter should be removed.
This can be removed by pushing the
special filter handle toward the back
side of the cooker hood and pulling it
downwards so to unfasten it from its
slot (Fig.3A).
Before fixing the hood, place the electric
feed correctly into the ornamental tube
and create a hole for air evacuation if
installing in vented/ducted mode.
Fig.3.
FIG.3
