Please keep this instruction manual for future reference
Instruction manual FOS/4IN1
11
2. Screw the Hot & Cold flexi hoses into the base of the hot/cold handle. The red hose connects
to the hot water, the blue hose connects to the cold water. The boiling water flexible hose and
the filtered water flexible hose connect to the base of the spout. The handle then needs to be
connected to the spout via the additional flexi hose, as shown in the diagram here:
3. Attach the T-piece connector to the Cold mains water supply,
to allow a separate flow to go direct to the water filter. The
Blue tube supplied with the filter, will need to be cut into 4
appropriate pieces. Connect one piece to the T-piece connecter
via the push fit connection. The opposite end can then be
attached to the inlet on the filter head. The filter comes
supplied with a splitter. Using another piece of the blue piping,
connect the filter head outlet to the splitter.
4. Follow the instructions supplied with the filter and filter head
to ensure it is installed correctly, and set to the correct setting for the water hardness in your
area. Failure to do this will invalidate your guarantee.
5. The hot & cold tap tails can be connected directly to the hot & cold mains water, and the
boiling water and filtered water flex tails can connect to the outlets on the top of the
electronic valve. The boiling water tail connects to the red ‘Out’ and the filtered water tail
connects the blue ‘Out’ on the electronic valve.
