1. The salt container must only be refilled when the salt warning light in the control panel comes on.
Depending
on
how
well
the
salt
dissolve s,
the
salt
warning
light
may
still
be
on
even
though
the
salt
container
is
filled.
If
there
is
no
salt
warning
light
in
the
control
panel
(for
some
m
odels),you
can
estimate
when
to
fill
the
salt
into
the
softener
by
the
cycles
that
the
dishwasher
has
run.
2. If
there
are
salt
spills,
a
soak
or
a
rapid
program
should
be
run
to
remove
the
excessive
salt.
Always use the salt intended for use with dishwasher.
The salt c ontain er is located beneath the lower basket and should be fill ed as explained
in t he foll owing:
Attention!
Only use salt spe cif ically desi gne d for t he use i n dishwashers! Every other type of
salt not speci fically de sig ned fo r the u se in a d ishwas her, espe cially table salt, will
damage the w ater sof tener. I n case of damages caused by the use of unsuitable
salt t he ma nuf act urer does not give any wa rranty nor is liable for any damages caused.
Only fil l wi th salt just b efore starting one of the co mp let e washing p rograms.
This wi ll prevent any g rains of s alt or salty wate r, which ma y have been spilled,
remaining on the bottom of the machi ne for any period of time, which may cause
corrosi on.
The rinse aid is released d uring the final rinse to prevent water from forming droplets on your dishes, which can
leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is
designed to use liquid rins e aids. The rinse a id dispenser is located inside the door next to the detergent dispense r.
To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely
black. The volume of the rinse aid container is about 110ml.
Rinse Aid Dispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.
Attention!
Only
use
branded
rinse
aid
for
dishwasher
s
.
Never
fill
the
rinse
aid
dispenser
with
any
other
substances
(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
Fill
the
salt
container
with
water,It
is
normal
for
a
small
amount
of
water
to
come
out
of
the
sal t containe r.
A
After the lower basket has been removed, unscrew and remove the cap from the salt container.
B
Pl ace the end of the funnel (supplied) into the hole and introduce about 1.5kg of dishwasher salt.
C
D
After
filling
the
container
,
screw
the
cap
tightly
back
clockwise.
E
The
salt
warning
light
will
switch off
after
the
salt
container
has
been
filled
with
salt.
F
Immediately after filling the salt into the salt container, a washing program should be started
program
Otherwise the filter system, pump or other important parts of the machine may be damaged
by
salty
water.
This
would not be covered by the w
arranty.
(We
suggest
a
short
).
