Instruction manual Di482
41
Please keep this instruction manual for future reference
P O S I T I O N I N G T H E A P P L I A N C E
Position the appliance in the desired location. The back should rest against the wall behind it, and
the sides, along the adjacent cabinets or walls. The dishwasher is equipped with water supply and
drain hoses that can be positioned either to the right or the left sides to facilitate
proper installation.
H OW TO D R A I N E X C E S S WAT E R F R O M H O S E S
If the sink waste is more than 1000mm from the floor, the excess water in the hoses cannot be
drained directly into the sink. It will be necessary to drain excess water from hoses into a bowl or
suitable container that is held outside and lower than the sink.
WAT E R O U T L E T
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks. Ensure
that the water inlet hose is not kinked or squashed.
E X T E N S I O N H O S E
If you need a drain hose extension, make sure to use a similar drain hose. It must be no longer
than 4 metres, otherwise the cleaning effectiveness of the dishwasher could be reduced.
S Y P H O N C O N N E C T I O N
Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the
sink, making sure to avoid bending or crimping it. The top of the hose must be less than 1000mm
from the floor.
S TA RT T H E D I S H WA S H E R
The following things should be checked before starting the dishwasher:
1. The dishwasher is level and fixed properly.
2. The inlet valve is open.
3. There is no leakage at the connection points.
4. The wires are tightly connected.
5. The power is switched on.
6. The inlet and drain hoses are not knotted.
7. All packing materials and printings should be taken out from the dishwasher.
