
Instruction manual Di481
9
Please keep this instruction manual for future reference
Q U I C K O P E R AT I O N G U I D E
For detailed operating method read the corresponding content on the instruction manual.
Switch on the appliance Open the door,press the On/Off button to switch on the appliance
Fill the detergent
dispenser
Compartment A:
With each wash cycle.
Compartment B:
For programmes with prewash only.
(Follow the user instructions)
Check the Rinse
Aid level
Mechanical Indicator C:
Electric indicator on control panel
Check the regeneration
salt level
Electric indicator on control panel
Load the baskets
Scrape off any large amount of leftover food. Soften remnants of burnt food in pans, then
load the baskets. Refer to the dishwasher loading instructions
Select a programme
Press the Programme button until the required programme lights up. (See the section entitled
“operation instruction”)
Running the dishwasher Close the door. The machine will start working at once.
Changing the
programme
1. A running cycle can only be modified if it has been running
for a short time. Otherwise the detergent may have already
been released and the water already drained. If this is the
case, the detergent dispenser must be refilled.
2. Open the door.
3. Press the Programme Button for 3 seconds to cancel the
running programme.
4. Select a new programme.
5. Close the dishwasher door to restart the dishwasher.
WA R N I N G :
Open the door carefully. Hot
steam may escape when the door
is opened!
Add forgotten dishes
in the dishwasher.
1.Open the door a little to stop the dishwasher.
2. After the spray arms stop working, you can open the door
completely.
3.Add the forgotten dishes.
4.Close the door, the dishwasher will start running again
If the appliance is
switched off during a
wash cycle
If the appliance is switched off during a wash cycle, when
switched on again, please re-select the washing cycle and
operate the dishwasher according to the original Power-on
state).
Switch off the appliance
When the working cycle has finished, the buzzer of the dishwasher will sound 8 times, then
stop. Turn off the appliance using the On/Off Button. Since the appliance is standing by, it will
power off automatically after 30 minutes without any operation.
Unload the Dishwasher
WA R N I N G
:
Wait a few minutes (about 15 minutes) before unloading the dishwasher
to avoid handling the dishes and utensils while they are still hot and more susceptible to
break. They will also dry better. Unload the appliance, starting from the lower basket.
With each wash cycle.
Compartment
For programmes with pre-wash only.
(Follow the user instructions!)
Electric indicator on control panel (if provided).
Check the rinse aid level
(On models with water softener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwasher has run.
Check the regeneration
salt level
Load the baskets
Select a programme
Turn on the water tap ,close the door . The machine will start working after about 10 seconds.
Running the dishwasher
Switch off the appliance
Turn off the water tap,
unload the baskets
Fill the detergent dispenser
Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid handling
the dishes and utensils while they are still hot and more susceptible to break.
They will also dry better.Unload the appliance, starting from the lower basket.
Changing the programme
Add forgotten dishes in the
dishwasher.
Scrape off any large amount of leftover food. Soften remnants of burnt food in pans,
then load the baskets. Refer to the dishwasher loading instructions.
Press the Programme Button until the selected programme lights up.
( See the section entitled Operation instruction )
“
”
When the working cycle has finished, the buzzer of the
dishwasher will sound 8 times, then stop.
Turn off the appliance using the On/Off Button.
If the appliance is switched
off during a wash cycle.
Open the door carefully.
Hot steam may escape
when the door is opened!
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ).
Switch on the appliance
Open the door,press the On/Off button to switch on the appliance .
1.Open the door a little to stop the dishwasher.
2.After the spray arms stop working, you can open the door completely.
3.Add the forgotten dishes.
4.Close the door, the dishwasher will start running again after 10 seconds.
For detailed operating method read the corresponding content on the instruction manual.
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If this is the case, the detergent
dispenser must be refilled.
2. Open the door.
3. Press the
for more than 3 seconds to cancel the running programme.
4. Select a new programme.
5. Restart the dishwasher.
Programme Button
5
A B
Di481 Intergrated Dishwasher Instruction Manual .indd 9
Di481 Intergrated Dishwasher Instruction Manual .indd 9
17/07/2020 15:17
17/07/2020 15:17