
Instruction manual Di481
39
Please keep this instruction manual for future reference
E L E C T R I C A L C O N N E C T I O N
WA R N I N G :
For personal safety:
»
Do not use an extension cord or an adapter plug with this appliance.
»
Do not, under any circumstances, cut or remove the earthing connection from the power cord.
E L E C T R I C A L R E Q U I R E M E N T S
Please look at the rating label to know the rating voltage and connect the dishwasher to the
appropriate power supply. Use the required 10 amp fuse, time delay fuse or circuit breaker
recommended and provide separate circuit serving only this appliance.
E L E C T R I C A L C O N N E C T I O N
Ensure the voltage and frequency of the power corresponds to those on the rating label. Only
insert the plug into an electrical socket which is earthed properly. If the electrical socket to which
the appliance must be connected is not appropriate for the plug, replace the socket, rather than
using an adapter as they could cause overheating and burns.
G R O U N D I N G I N S T R U C T I O N S
This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce
the risk of electric shock by providing a path of least resistance for the electric current. This
appliance is equipped with a cord having an equipment-earthing conductor and an earthing plug.
The plug must be plugged into an appropriate outlet that is installed and earthed in accordance
with all local standards and requirements.
WA R N I N G :
Improper connection of the equipment grounding conductor can result in the risk of an electric
shock. Check with a qualified electrician or service representative if you are in doubt whether the
appliance is properly grounded. Do not modify the plug provided with the appliance, if it is not fit
for the outlet. Have a proper outlet installed by a qualified electrician.
C O L D WAT E R C O N N E C T I O N
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it
is fastened tightly in place. If the water pipes are new or have not been used for an extended
period of time, let the water run to make sure that the water is clear and free of impurities. If this
precaution is not taken, there is a risk that the water inlet can get blocked and damage
the appliance.
WA R N I N G :
Please close the hydrant after using.
AT T E N T I O N :
After installation, please make sure to keep this manual. The content of this manual is very helpful
to the users.
Di481 Intergrated Dishwasher Instruction Manual .indd 39
Di481 Intergrated Dishwasher Instruction Manual .indd 39
17/07/2020 15:17
17/07/2020 15:17