6
USING THE BURNERS
Automatic electric ignition of burners
To light the burner of the hob selected for cooking, push in the cor-
responding knob and turn in an anti-clockwise direction to the ful-
ly on position (shown in Fig. 4); when pressed fully in, the spark will
be generated automatically, igniting the burner.
IMPORTANT: Do not operate the spark ignition button for a long
time, as this can damage the spark generator.
To shut off the gas supply, turn the knob in a clockwise direction
to the position (gas supply off).
Suggestions for conserving energy
Avoid using pans that are too small for the burner, so that the fla-
mes don’t lick up the sides of the pan. When the contents have
boiled, reduce the flame setting to a simmer by turning the knob
anticlockwise (fig. 4). To facilitate saving gas, the hob has burners
with different diameters and power ratings. Use the appropriate
burner for each type of pan, as detailed below:
Twin model ovens and grills
The standard conformation consists of a multifunction oven on
the left and a static oven on the right.
The left oven is equipped with grill with an energy regulator.
The right oven is equipped with a fixed grill (with turnspit).
Runners
The shelves slot into the runners “A” .These runners (see Fig. 6)
mean that dishes can be cooked at different heights, 10 for twin
model, selecting the best height for the particular dish.To remove
the shelves see fig. 6.To remove the shelves from the oven, pull and
lift as shown in Fig. 6/A below.
Tips
Open and close the oven door gently and never leave it ajar when
the oven is hot. This could cause damage to the control knobs.
fig. 6
fig. 6/A
fig. 4
fig. 5
Rapid burner
R
Pan diameter from cm 24/26
Semi-rapid burner
B
Pan diameter from cm 16/18
Auxiliary burner
A
Pan diameter from cm 12/14
Kwali triple flame burner
BK
Pan diameter from cm 24/26
Instructions for use
Summary of Contents for CR1001SS
Page 2: ......
