5
Replacement of the electrical feeder cable
To connect the feeder cable to the cooker it is necessary to:
– Remove the screw that hold shield “A” behind the cooker (fig. 1.2).
– Insert the feeder cable of the suitable section (as described in the next chapter) into
the cable clamp “D”.
– Connect the phase and earth cables to the terminal block “B” according to the diagram
in figure 1.3.
– Pull the feeder cable and block it with cable clamp “D”.
– Re-mount shield “A”.
Fig. 1.2
D
B
A
230 V
PE
N
L
1
(L
2
)
Fig. 1.3
FEEDER CABLE SECTION
type H05RR-F
230 V
3 x 0,75 mm
2
PE
;;;
;;;
;
;
;
;
;
;
;
;
;;
Warning!
Before effecting any intervention on the electrical parts the appliance must be
disconnected from the network.
Summary of Contents for CR 9210
Page 1: ...Instruction Manual Twin Oven Gas Cooker Model CR 9210 GB...
Page 43: ...43...
