Caple CR 9210, Instruction Manual

Page: 14 / 44

14
Fig. 3.6
Fig. 3.7
Fig. 3.8
Fig. 3.9
LEFT OVEN
Oven burner and grill
burner replacement of
injectors
a) oven burner
– Lift and remove the lower panel inside
the oven.
– Remove the burner securing screw
(fig. 3.6).
– Withdraw the burner as shown in fig-
ure 3.7 and rest it inside the oven.
Take care not to damage the wire to
the ignition electrode and the safety
valve probe.
– Using a 7 mm box spanner, unscrew
the injector (indicated by the arrow in
fig. 3.7) and replace it by the proper
one according to the kind of gas.
Then replace the burner repeating the
above steps in reverse order.
b) grill burner
– Remove the burner by unscrewing the
front screw (fig. 3.8).
Gently suspend the burner as shown
in figure 3.9. Be careful not to damage
the wire of the electric ignition and the
probe of the safety valve.
– Using a 7 mm box spanner, replace
the injector (indicated by the arrow in
fig. 3.9) by the proper one according
to the kind of gas.
– Replace the burner repeating the
above steps in reverse order.