background image

6

RECOMMENDED

DISTANCE BETWEEN APPLIANCE AND HOOD

50 mm

50 mm

NOT RECOMMENDED

NOT RECOMMENDED

INSTALLATION

General Instructions.

 

The installation and the connection must be done 

only by a qualified electrician. Refer only to an 

electrician who knows local and supplemental 

rules promulgated by local electrical firm. 

Take care of that the work is made in respect 

of these rules. The producer is not responsible 

for damages caused by wrong embedding or 

connection of the appliance.

 

The  appliance electrical security is guaranteed 

only if this is connected to a regular grounded 

conductor. It is important to check that this 

condition is satisfied because it is a fundamental 

condition. If in doubts call a skilled technician 

to check the installation. The producer do not 

respond for damages caused by the absence or 

interruption of the grounding conductor.

 

The appliance do not be linked up to the electrical 

system with an extension; extensions do not 

warrant the security of the appliance.

 

The  hob should not be installed over a 

dishwasher, a tumble dryer, a washing machine, 

a cooling, a freezing, an oven or an unprovide 

appliance fan cooling kitchen. On the one hand 

high release temperatures can damage these 

appliances, on the other hand in this way the 

ventilation of the hob is not ensured.

 

 The installation and the assembly of the hob in 

non-stationary places, like for example a ship, 

can be realized only by skilled technicians to 

guarantee safety during the functioning.

 

If  under the appliance there is a drawer, do 

not conserve flamable object inside of it (i.e. 

canisters).

 

Make  sure that after the installation, the hob 

electrical system connection wire is not subjected 

to mechanical stress, (i.e. doe to a drawer).

 

The  hob veneerings must be manufactured with 

thermoresistant adhesive (100°C), so they could 

not detach or bunckle. Also the back profiles must 

be thermoresistant.

 

On  one side and on the back side of an 

embedded ceramic hob there can be walls or 

furnitures of every height, while on the other side 

the furniture or an existing appliance must not be 

higher than the hob.

Summary of Contents for C930I

















Reviews: