Instruction manual C897i
30
Please keep this instruction manual for future reference
A D J U S T I N G T H E B R AC K E T P O S I T I O N
Fix the hob on the work surface by screwing 2 brackets on the bottom of hob (see picture) after
installation. Adjust the bracket position to suit for different worktop thickness.
There are ventilation holes around the outside of the hob. YOU MUST ensure these
holes are not blocked by the worktop when you place the hob in position.
The rear wall, adjacent and surrounding surfaces must be able to withstand
an temperature of 90
℃
.
Under any circumstances, the brackets cannot touch with the inner surfaces of the worktop
after installation (see picture). This will ensure the hob is properly secured to the underside of the
work surface.
CAUTIONS:
› The hob should not be installed directly above a dishwasher, fridge, freezer, washing machine or
clothes dryer, as the humidity may damage the hob electronics.
› The wall and induced heating zone above the table surface should be able to withstand heat.
› To avoid any damage, the worktop sandwich layer and adhesive must be heat resistant.
C O N N E C T I N G T H E H O B TO T H E M A I N S P OW E R S U P P LY
WARNING:
› This hob must be connected to the mains power supply only by a suitably qualified person.
› Before connecting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.