background image

Instruction manual C897i

16

Please keep this instruction manual for future reference 

W H E N  YO U   H AV E   F I N I S H E D   C O O K I N G

Touch the heating zone selection control that you wish to switch off.

Turn the cooking zone off by moving the slider to “ I “.  

Make sure the display shows”0”.

6

If the display flashes 

alternately with the heat 

setting

This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.

No heating takes place unless there is a suitable pan on the cooking zone. 
The display will automatically turn off after 2 minutes if no suitable pan is 
placed on it.   

When you have finished cooking

1. Touch the heating zone selection

control that you wish to switch off

2. Turn the cooking zone off by scrolling down to” 0” or touching”-“ and”+”

control together. Make sure the display shows”0”

3. Turn the whole cooktop off by touching the ON/OFF   control.

Turn the hob off completely by touching the ON/OFF control.

 Beware of hot surfaces

‘H’ will show which cooking zone is hot to touch. It will disappear when 

the surface has cooled down to a safe temperature. It can also be used as 

an energy saving function if you want to heat further pans, use the zone 

that is still hot.

Summary of Contents for C897i





































Reviews: