background image

Instruction manual C892C 5

Please keep this instruction manual for future reference 

 

-

 Please make this information available to the person 

responsible for installing the appliance. 

 

-

 In order to avoid a hazard, this appliance must be installed 

according to these instructions.

 

-

 This appliance is to be installed correctly and earthed only 

by a suitably qualified person.

 

-

 This appliance should be connected to a circuit which 

incorporates an isolating switch providing full disconnection 

from the power supply.

 

-

 Failure to install the appliance correctly could invalidate any 

warranty or liability claims.

O P E R A T I O N   A N D   M A I N T E N A N C E 
W A R N I N G S

ELECTRICAL SHOCK HAZARD

 

-

 Do not cook on a broken or cracked hob. If the hob surface 

should break or crack, switch the appliance off immediately 

at the main power supply (wall switch) and contact a 

qualified technician.

 

-

 Switch the hob off at the wall before cleaning  

or maintenance.

 

-

 Failure to follow this advice could be fatal or seriously  

injure user.

Summary of Contents for C892C

































Reviews: