Instruction manual C846I
Please keep this instruction manual for future reference
19
USING YOUR INDUCTION HOB
To start cooking
Touch the ON/OFF control. After power on, the buzzer beeps
once, all displays show “ “ or “ “, indicating that the
induction hob has entered the state of standby mode.
Place a suitable pan on the cooking zone that you
wish to use.
Make sure the bottom of the pan and the surface Of the
cooking zone are clean and dry.
Touch the heating zone selection control and an indicator
where you touched will flash.
Adjust the heat setting by touching the the slider control.
If you don’t choose a heat setting within 1 minute, the
Induction hob will automatically switch off. You will need to
start again at step 1.
You can modify the heat setting at any time during cooking.
If the display flashes
alternately with the heat setting this means that:
- You have not placed a pan on the correct cooking zone
- The pan you’re using is not suitable for induction cooking
- The pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone. The
display will automatically turn off after 2 minutes if no suitable pan is placed on it.