Instruction manual C846I
Please keep this instruction manual for future reference
13
Check with an electrician whether the domestic wiring system is suitable without
alterations. Any alterations must only be made by a qualified electrician.
The power supply should be connected in compliance with the relevant standard,or
a single-pole circuit breaker.the method of connection is shown below.
- If the total number of heating unit of the appliance you choose is not less than
4, the appliance can be connected directly to the mains by single-phase electric
connection, as shown below .
- If the cable is damaged or to be replaced, the operation must be carried outthe by
after-sale agent with dedicated tools to avoid any accidents.
- If the appliance is being connected directly to the mains an omnipolar circuit-
breaker must be installed with a minimum opening of 3mm between contacts.
- The installer must ensure that the correct electrical connection has been made and
that it is compliant with safety regulations.
- The cable must not be bent or compressed.
- The cable must be checked regularly and replaced by authorised technicians only.
