Instruction manual C843I
Please keep this instruction manual for future reference
23
ADJUSTING THE BRACKET POSITION
Fix the hob on the work surface by screwing 4 brackets on the bottom of hob (see
picture) after installation. Adjust the bracket position to suit for different worktop
thickness.
CAUTIONS:
- The hob should not be installed directly above a dishwasher, fridge, freezer,
washing machine or clothes dryer, as the humidity may damage the hob
electronics.
- The wall and induced heating zone above the table surface should be able to
withstand heat.
- To avoid any damage, the worktop sandwich layer and adhesive must be heat
resistant.
Connecting the hob to the mains power supply
WARNING:
- This hob must be connected to the mains power supply only by a suitably
qualified person.
- Before connecting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate
3. The power supply cable sections can withstand the load specified on the
rating plate.
- To connect the hob to the mains power supply, do not use adapters, reducers, or
branching devices, as they can cause overheating and fire.
- The power supply cable must not touch any hot parts and must be positioned so
that its temperature will not exceed 75°C at any point.
15
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto any area.
Fix the hob to the work surface by screwing four brackets to the bottom of hob (see picture) after installation.
A
B
C
D
screw bracket Screw
hole base
Adjust the bracket position to suit for different work surface’s thickness.
Caution
1. The ceramic hob must be installed by qualified personnel or technicians. We have professionals at your service.
Please never conduct the operation by yourself.
2. The ceramic hob must not be mounted to cooling equipment, dishwashers and rotary dryers.
3. The hob must be installed such that better heat radiation can be ensured to enhance its reliability.
4. The wall and induced heating zone above the work surface must withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6. A steam cleaner is not to be used.
A
B
C
D
HOB
WORK SURFACE
A
HOB
WORK SURFACE
B
BRACKET
BRACKET
C843i_Induction hob Instruction manual.indd 23
31/05/2018 16:45