5
INSTRUCTION FOR THE USER
GB
When we touch the keys (8) of the timer the first time,
it will appear “t” in each heating element display
waiting you selection.
●
We always have to select the heating element after
we have pressed a key of the timer.
●
If we do not select any heating element during 10
sec., then the timer will switch off.
●
After our heating-element selection we do not
indicate a time different than 00, in 10 sec. The
timer will switch off.
It could be possible to temporized a heating element
with power level 0.
Indication of timed heating element
The touch control can indicate which heating
element the timer is set up to control.
A flashing “t” appears over the timed heating
element display (5) for 5 seconds every 15 seconds
or every time the (+) or (-) timer sensors are pressed
(Key 8).
This option is advisable when the timed heating
element is programmable, as it serves to remind the
user which heating element has been selected.
Duration of the acoustic alarm
Once the timed period has finished, an acoustic
alarm sounds for a certain period and <00> flashes
on the timer displays (7). The duration of the acoustic
alarm can be programmed.
●
1 minute alarm:
The acoustic alarm stops after one minute. The timer
displays continue to flash <00>.The user can switch
off the alarm at any moment, even during the first
minute, by pressing any sensor of the touch control.
●
Indefinite alarm:
The alarm continues to sound until the user switches
it off by pressing any sensor of the touch control.
Default initial timer value
The timer is switched on by pressing the (+) or (-)
timer sensors (Key 8). If the (-) sensor is pressed the
initial timer value will be 99 minutes, whereas with the
(+) sensor, the initial timer value can be pre-
determined to any value between 00 and 99 minutes.
Timer / Timer-Alarm mode
The timer has two different working modes:
●
Timer mode: when the programmed period is over,
the alarm is activated and the timed heating
element switches itself off automatically. If the timer
is set in this mode, this is indicated by the fact that
the decimal point on the timer display is lit (7).
●
Alarm mode: when the programmed period is over,
the alarm is activated although the timed heating
element is not switched off automatically. If the
timer is set in this mode, this is indicated by the
fact that the decimal point on the timer display is
not lit (7).
The touch control enables the timer to be
programmed for the following settings:
1. Timer setting:
Only allow the timer to work in timer mode.
2. Timer-alarm setting:
Allow the timer to work in either timer mode or
alarm mode. The working mode is programmed
by the user.
Configuration examples.
The following examples detail the basic functioning
of the timer combining the timed heating element
(fixed/programmable) and timer/timer-alarm settings.
Any combination of the 4 remaining options (see
below) can be added to these examples.
Increase of timer value (1 min. /5 min.).
Indication of timed heating element.
Duration of the acoustic alarm (1 min. /indefinite).
Default initial timer value.
These options permit the touch control timer to be
customised to meet the individual requirements of
the user.
Example #1: Fixed timed heating e timer
setting
The timer always works in timer mode, regulating the
length of time the timed heating element is switched
on. Once the programmed period is over, the timed
heating element switches itself off automatically. The
corresponding display (5) also switches off or shows
an “H” to indicate residual heat and the timer alarm is
activated.
Example #2: Fixed timed heating e timer-
alarm setting
The timer functions in either timer mode or alarm
mode.
Timer mode: the programmed value determines the
time during which the timed heating element is
activated. Once the programmed period has passed,
the fixed timed heating element switches itself off
automatically. The corresponding display (5) also
switches off or shows an “H” to indicate residual
heat and the timer alarm is activated. To select this
mode, before activating the timer (the timer display