3
GB
INSTRUCTION FOR THE USER
NOTICE
●
Use only flat pans and with sufficiently thick base,
equal or not much superior that the hot plate (fig.1)
●
The containers should not have rough bottoms in
order to avoid scratching the heat surface of the top.
●
Do not switch the electric plate without the pan
over the plate.
●
Do not cook any food on the hot area.
●
Avoid overflows of liquid.
●
Turn off the plate few minutes before the cooking end.
USE
Version by Touch Control switches
Switching on
The control is switched on by pressing the On/Off
key (key 6) for 1 second, causing a sound signal; it
will not turn on while the Key Lock function (key 10)
is active (indicated by a LED) (Led 11).
The heating elements remain switched off (all the
digits at 0) until a power level is selected. If this is
not done within 10 seconds the control switches off
automatically.
Selecting the cooking level
With the control turned on, the first time that the (+)
sensor (key 1) is touched the heating element is
turned on to the present level (in EEPROM).
The (+) sensor raises the cooking level to a maximum
of 9, and the (-) (key 1) sensor reduces the cooking
level to 0 (heating element switched off).
If a sensor is continuously pressed, the action
involved is repeated every half second.
If we start with the (-) sensor the cooking level will be
the highest (9).
Switching the double cooking area
The control (key3) or (key12) can be used to
activate 2 heating elements with a double cooking
area and one of them with 1 triple area, with 2
sensors to activate or cancel it. Each cooking area
has an associated LED (Led 4 & 13). The selection
of the heating element associated with the second
cooking area is made in the factory through the
configuration software.
Touch the double area selector to select/deselect
the double cooking area. If one heating-element has
1 double and 1 triple areas the procedure will be:
●
1rs-touch: the double area is selected
●
2nd-touch: the triple area is selected
●
3rd-touch: double and triple areas are not selected
When the double cooking area is selected the
associated LED (Led 4 or 13) turns on, although its
heating-element has not any power level, and its
relay will be still switch.
Activating the heat-up function
When cooking level 9 is selected (this function can
only be operated from this level) touching the(+) (Key
1) sensor, the decimal point on the display (5) blinks
for 10 seconds, during which the desired power level
must be selected (between 1 and 8). After this time
there is a sound signal, and the decimal point
remains fixed, indicating the heat-up function is ON.
Should the selected level be 0 or 9, the heat-up
function is cancelled.
With the heat-up function activated, by touching the
(+) sensor the duration of this function extends to the
new power value selected; if the power is 9, the heat-
up function is cancelled. When the heat-up function
is finished, there is a sound signal, the decimal point
of the display goes out and the element remains at
the chosen power level.
Cancelling the heat-up function
Touch the (-) (Key 1) sensor while the heat-up function
is ON to cancel it. The cooking level goes down.
When the heat-up function is cancelled, there is a
sound signal and the decimal point on the display
goes out. It shows blinking an “H” with the cooking
level 0, when the temperature of the heating-element
reaches 65°C. It appears fixed if the touch control is
switch-off.
Setting the Key Lock function
Keep the Key Lock (Key 10) sensor pressed to
activate/cancel the keyboard locking function. If the
LED (11) associated with the Key Lock sensor is on,
the keyboard is locked.
All operation relative to installation and electric connection should be carried out by skilled
personnel in conformity with the regulations in force.
The specific instruction are described in the booklet section intended for the installer