Instruction manual C4245
Please keep this instruction manual for future reference
13
Connection to the mains supply
WARNING:
This appliance must be earthed
- Check that the power rating of the mains supply and of the sockets are suitable
for the maximum power of the appliance as indicated on the rating plate.
- The plug should be accessible after installation. Fit the plug into a socket fitted
with a third contact which corresponds with the earth connection. This should be
properly connected.
If the appliance is fitted with supply leads but not connected to a plug, you must
permanently connect to fixed wiring as follow:
- The yellow/green earth wire, which must be connected to terminal, has to be
approximately 10mm longer than the other wires; the blue neutral wire has to be
connected to the terminal marked with letter N.
- Black, brown, red live wires have to be connected to terminal L. Mains
connection can also be made by fitting double pole switch with a minimum gap
between the contacts of 3mm, proportionate to the load and complying with the
regulations in force.
- The yellow/green earth wire should not be controlled by the switch.
- The plug or a double pole switch used for mains supply connection should be
easy to get at, once the appliance is in position.
