14
Instruction manual C4061G/C4071G/C4091G
Please keep this instruction manual for future reference
If, despite all of these checks, the hob does not function properly and problems persist,
call our Caple Service department for help:
T - 0117 938 7420
E - [email protected]
I N S T A L L A T I O N I N S T R U C T I O N S
Installation should only be attempted by a qualified installer so that the installation and
maintenance procedures may be followed in the most professional and expert manner possible.
I M P O R TA N T :
Unplug the electrical connection before performing any maintenance or regulation upkeep work.
U N PA C K I N G T H E A P P L I A N C E
Once the outer and inner wrappings of the various parts have been removed, check and make sure
that the appliance is in perfect condition. If you have any doubts do not use the appliance and call
Caple Service.
Some parts are mounted on the appliance and protected by a plastic film. This protective film must
be removed before the appliance is used.
P O S I T I O N I N G F O R G A S H O B
I M P O R TA N T :
This unit may be installed and used only in permanently ventilated rooms according to British
standards.
The following requirements must be observed:
› The room must be fitted with a ventilation system which vents smoke and gases from
combustion to the outside. This must be done by means of a hood or electric ventilator that turns
on automatically each time the hood is operated.
› The room must also allow for the influx of the air needed for proper combustion. The flow of air
for combustion purposes must, not be less than 2m³/h per kW of installed capacity. The supply of
said air can be effected by means of direct influx from the outside through a duct with an inner
cross section of at least 100cm² which must not be able to be accidentally blocked.
Summary of Contents for C4061G
Page 24: ......