27
REPLACING THE OVEN LAMPS
WARNING: Ensure the appliance is switched off before replacing the lamp to avoid
the possibility of electric shock.
• Let the oven cavity and the heating elements to cool down;
• Switch off the electrical supply;
REAR LAMP:
• Remove the protective cover C (fig. 6.6);
• Unscrew and replace the bulb B with a new one suitable for high temperatures (300°C)
having the following specifications: 220-240V, E14 and same power (check watt power
as stamped in the bulb itself) of the replaced bulb.
• Refit the protective cover;
LEFT LAMP:
• Remove the left wire rack by unscrewing the fixing screws.
• Press down from the top the protective cover A (fig. 6.6) and remove it by rotating
on the lower side. IMPORTANT: never use screwdrivers or other utensils to remove
the cover A. This could damage the enamel of the oven or the lampholder.
Operate only by hands.
• Unscrew and replace the bulb B with a new one suitable for high temperatures (300°C)
having the following specifications: 220-240V, E14 and same power (check watt power
as stamped in the bulb itself) of the replaced bulb.
• Refit the protective cover A operating in reverse order. ATTENTION: the notch in the
inner edge of the cover must be oriented toward the lamp.
• Assemble the left wire rack.
Note: Oven bulb replacement is not covered by your guarantee.
A
B
B
C
1
2
A
A
Fig. 6.6
