24
STAINLESS STEEL SURFACES
,
ALUMINIUM PARTS AND PAINTED OR
SILK-SCREEN PRINTED SURFACES
Clean using an appropriate product. Always dry thoroughly.
IMPORTANT: these parts must be cleaned very carefully to avoid scratching and abra-
sion. You are advised to use a soft cloth and neutral soap.
GLASS CONTROL PANEL
Clean using an appropriate product.
Always dry thoroughly.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the control panel
since they can scratch the surface, which may result in shattering of the glass.
OVEN FITTING OUT
• Assemble the wire racks to the oven walls using the 2 screws (Fig. 6.1).
• Slide in, on the guides, the shelf and the tray (fig. 6.2).
The shelf must be fitted so that the safety catch, which stops it sliding out, faces
the inside of the oven.
• To dismantle, operate in reverse order.
Fig. 6.2
Fig. 6.1
