10
Electronic Clock/Alarm
The electronic alarm is a device which
groups the functions of a 24 hours clock
with illuminated display and 99 minutes
alarm.
A - Electronic clock
Upon immediate connection of the
cooker or after a mains failure, three
zeros will flash on the programmer
panel.
To set the clock it is necessary to push
the
button and then, within 7
seconds, the
or
button until you
have set the correct time.
The clock will show zero after a mains
failure.
Attention: When the programmer
display shows three flashing zeros the
oven cannot be switched on.
The oven can be switched on when the
symbol
is shown in the display.
A
U
T
O
Setting the frequency of the
alarm sound
The selection from 3 possibilities of
sound can be made by pressing the
button.
Fig. 11
Cooking with automatic
swith-off (Main oven only)
The aim of this function is to
automatically stop the cooking after a pre
programmed time, for a maximum period
of 99 minutes.
To set the cooking time, push the
or
button until you obtain the desired
time in the display.
The symbol AUTO will be shown in the
display. Then you adjust the oven
thermostat knob according to the
required temperature. The oven will
immediately start to operate and will
work for the pre programmed time. The
display shows the count down. Clock
time can be displayed by pressing the
button. Once the time has elasped,
the oven will switch off automatically, the
symbol AUTO will go off and an
intermittent buzzer, lasting 7 minutes, will
start; this can be stopped by pressing the
button.
Important: Before the buzzer is
stopped switch off the oven manually.
To cancel the cooking program at any
time press the
and
buttons
together and release the
button first.
Electronic alarm
The programmer can be used as an
alarm only for a maximum period of 99
minutes.
To set the alarm, push the
or
button until you obtain the desired time
in the display. Once the time has
elasped, an intermittent buzzer, lasting 7
minutes, will start; this can be stopped
by pressing the
button.
Attention: If the main oven is
switched on when the buzzer starts, it
will be automatically switched off. For
it to operate further you have to stop
the buzzer by pressing the
button.
