12
R
R
R
Replacing the bulb
eplacing the bulb
eplacing the bulb
eplacing the bulb
1.Switch the unit off and unplug the appliance.
2.Remove the lamp cover by unscrewing the 2 screws.
3.Replace with the same type and rated bulb/lamp
LED lamp (max: 1.5W).
Troubleshooting
Fault
Fault
Fault
Fault
Cause
Cause
Cause
Cause
Solution
Solution
Solution
Solution
Lights on, but
the fan does not
work
The fan blade is jammed.
Switch off the unit and contact Caple
Service to repair the product.
The motor is damaged.
Both lights and
fan do not work
A blown fuse
Replace the fuse
The power cord is loose.
Plug in to the power supply again.
Serious vibration
of the unit
The fan blade is damaged.
Switch off the unit and contact Caple
Service. To be repaired by qualified
service personnel only.
The fan motor is not fixed
tightly.
Switch off the unit and contact Caple
Service. To be repaired by qualified
service personnel only.
The unit is not hung
correctly on the bracket.
Take down the unit and check whether
the bracket is in the correct location.
The extraction
performance is
not good
The filter requires cleaning
Clean the grease filter as directed in
the ‘Care and maintenance’ section.
Replace the charcoal filter (if in
recirculation mode)
If the above table has not solved the problem please contact Caple Service by phone
on 0844 800 3830 or by email [email protected]
Summary of Contents for BXI910
Page 1: ......