Caple 857i Instruction Manual Download Page 3

Instruction manual C857i

Instruction manual C857i

4

5

Please keep this instruction manual for future reference 

Please keep this instruction manual for future reference 

IMPORTANT SAFETY INSTRUCTIONS

 

-

 Read these instructions carefully before installing or using 

this appliance.

 

-

 No combustible materials or products should be placed on 

this appliance at any time.

 

-

 Please make this information available to the person 

responsible for installing the appliance. 

 

-

 In order to avoid a hazard, this appliance must be installed 

according to these instructions.

 

-

 This appliance is to be installed correctly and earthed only 

by a suitably qualified person.

 

-

 This appliance should be connected to a circuit which 

incorporates an isolating switch providing full disconnection 

from the power supply.

 

-

 Failure to install the appliance correctly could invalidate any 

warranty or liability claims.

O P E R A T I O N   A N D   M A I N T E N A N C E 
W A R N I N G S

ELECTRICAL SHOCK HAZARD

 

-

 Do not cook on a broken or cracked hob. If the hob surface 

should break or crack, switch the appliance off immediately 

at the main power supply (wall switch) and contact a 

qualified technician.

 

-

 Switch the hob off at the wall before cleaning or 

maintenance.

 

-

 Failure to follow this advice could be fatal or seriously injure 

user.

HEALTH HAZARD

 

-

 This appliance complies with electromagnetic safety 

standards.

 

-

 Persons with cardiac pacemakers or other electrical 

implants must consult their doctor before using this 

appliance to ensure the implants will not be affected by the 

electromagnetic field.

 

-

 Failure to follow this advice could be fatal or seriously injure 

the user.

 

HOT SURFACE HAZARD

 

-

 During use, accessible parts of this appliance will become 

hot enough to cause burns.

 

-

 Do not let your body, clothing or any item other than 

suitable cookware contact the induction glass until the 

surface is cool.

 

-

 Metallic objects such as knives, forks, spoons and lids 

should not be placed on the hob surface.

 

-

Keep children away from appliance.

 

-

 Handles of saucepans may be hot to touch. Check saucepan 

handles do not overhang other cooking zones that are on. 

Keep handles out of reach of children.

 

-

 Failure to follow this advice could result in burns and scalds.

Summary of Contents for 857i




















Reviews: