Instruction manual C857i
Instruction manual C857i
30
31
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
FA I L U R E D I S P L AY A N D E R R O R C O D E S
The induction hob is equipped with a self diagnostic function. With this test the technician is able
to check the function of several components without disassembling or dismounting the hob from
the working surface.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the induction
hob. Caple Service can be contacted by telephone on 0117 938 1900.
P R O B L E M
P O S S I B L E C AU S E S
W H AT TO D O
F1-F6
Temperature sensor failure.
Please contact Caple service
F9-FA
Temperature sensor of the IGBT failure.
Please contact Caple service
FC
The connection between the display board
and the main board has failed
Please contact Caple service
E1/E2
Abnormal supply voltage
Please inspect whether power supply is
normal. Power on after the power supply is
normal.
E3/E4
Temperature sensor of the ceramic glass
plate Is high
Please restart after the induction hob cools
down.
E5
Temperature sensor of the IGBT Is high
Please restart after the induction hob cools
down.
S P E C I F I C FA I L U R E A N D S O L U T I O N
FA I L U R E
P R O B L E M
S O L U T I O N A
S O L U T I O N B
The LED does not come on
when unit is plugged in.
No power supplied.
Check to see if plug is
secured tightly in outlet and
that outlet is working.
The accessorial power
board and the display board
connected failure.
Check the connection.
The accessorial power board
is damaged.
Replace the accessorial
power board.
Some buttons don’t work,
or the LED display is not
working normally.
The display board is
damaged.
Replace the display board.
The cooking mode indicator
comes on, but heating does
not start.
High temperature of the hob.
Ambient temperature may
be too high. Air intake or air
vent may be blocked.
There is something wrong
with the fan.
Check whether the fan runs
smoothly, if not, replace
the fan.
The power board is
damaged.
Replace the power board.
Heating suddenly stops
during the operation and the
display flashes .
Pan type is incorrect.
Use correct pan, please
refer to ‘Induction cooking’
section of the manual.
Pan detection circuit is
damaged, replace the power
board.
Pot diameter is too small.
Hob has overheated.
Unit is overheated. Wait
for temperature to return
to normal. Push “ON/OFF”
button to restart unit.
Pan detection circuit is
damaged, replace the power
board.
Heating zones of the same
side (Such as the first and
the second zone) would
display .
The power board and the
display board connected
failure.
Check the connection.
The display board of
communicate part is
damaged.
Replace the display board.
The Main board is damaged. Replace the power board.
Fan motor sounds abnormal. The fan motor is damaged.
Replace the fan.
The above are the judgment and inspection of common failures. Please do not disassemble the
unit by yourself to avoid any dangers and damages to the hob.
