CAPITAL SPORTS Evo Pro, Manual

Page: 40 / 160

40
Assembly
Assembly notes
• Please use floor padding, such as cardboard, to avoid scratching your floor during assembly.
• The nuts and bolts have a little grease on them to protect them from corrosion. Please keep a rag
handy to wipe your hands.
• Some plastic end caps and plugs have been assembled on the unit prior to shipment. They are
shown on the assembly drawings for reference in the event replacement parts are needed.
• The BIKE uses several different lengths of bolts. Be carefully to use the correct length of bolt called
for at each step of assembly.
Before you begin
Locate a comfortable work site. Assemble your BIKE in an open space with adequate ventilation
and lighting. Because the BIKE is portable to some extent, you need not assemble it exactly where
it is to be used. For your convenience, however, you should avoid hauling the Bike across excessive
distance, through narrow passageways or over staircases once its assembly is complete. If the BIKE
is to be assembled in living quarters, protect the floor or carpet with a large mat before removing parts
from carton.