Capital Safety DBI SALA 8520267 User Instructions Download Page 5

ISO 9001

REGISTERED

Capital Safety USA: 800.328.6146 • Canada: 800.387.7484 • Asia: + 65 6558 7758 •

Australia/New Zealand: 800 245 002 • Europe, Middle East, Africa: +33 (0) 497 10 00 10 •

Northern Europe: +44 (0) 1928 571324

www.capitalsafety.com • info@capitalsafety.com

Manway Davit Mount System

Model#: 8520267 & 8560267

Inspection:

  

Before Every Use:

  *All fasteners must be tight, secure and not damaged.
  *Ensure system is free of cracks, dents, distortion, or any other damage.
  *Inspect for corrosion or rust.
  *All labels must be present and fully legible.
  *Record results of inspection in the inspection and maintenance log provided.
  *If inspection reveals an unsafe or defective condition, remove the system from service and 
   destroy, or contact Capital Safety Group for repair or replacement.

  Monthly:

  *A formal inspection of the system should be done by a competent person other than the user.  
   Record results of inspection in the inspection and maintenance log provided.

IMPORTANT: 

Extreme working conditions (harsh environments, prolonged use) may require increasing 

the frequency of inspections.

WARNING: 

If the system has been subjected to fall arrest forces, it must be immediately removed from 

service and inspected. If the system fails inspection, remove from service and destroy, or contact Capital 
Safety Group for repair or replacement.

SERIAL NO.

MFRD

(Y/M)

:          

LOT NO.: 

       

MODEL NO.:

         

LENGTH

(FT)

:

www.capitalsafety.com

(800) 328-6146

9504547

Labels:

9504547

FlexiGuard

 

CUSTOM FALL 

PROTECTION SOLUTIONS

TM

This component is rated for a working
load of 450 lb. (205 kg). Retractable
devices or shock absorbers must have a
MAXIMUM ARRESTING FORCE (M.A.F.)
RATING OF 900 lb. (4kN) OR LESS.
System rating is that of the lowest rated
system component.

WARNING

Pt# 13219

8513219

This base is to be used
only with the following
offsets:

Pt# 8514755

6” 12” 18” 24” 30” 36” 48”

WARNING

8514755

8513424

8515272

(CE certified models only)

PAGE 5

Summary of Contents for DBI SALA 8520267









Reviews: