Contour 5W Series Manual
© Capital Fireplaces 2018
14
The minimum distance from the rear of the stove to a wall is 75mm, and 500mm to either side
of the appliance. No combustible material should be within this area
(see below, left)
.
There is however an exception made when the stove is placed in a corner, the closest point
of the stove to both walls should be at least 100mm
(see below, right)
. We also recommend
at least 1000mm clearance around the stove to glass
(excluding hearths)
.
Please note the Hot Zone to the front of the stove extends 1000mm from the window and
ends in line with each side of the door edge. This area can be 90
o
C, so we do not recommend
any combustibles in this area.
Operating Instructions
Fixing Points
If you would like to fix the stove to the ground, you can do this using the fixing points shown
below. For anchoring the Pedestal model to your hearth you will need x4 M12 bolts and x4
M12 nuts (not supplied).The Log Store model has M12 nuts built into the base, therefore you
will only require x4 M12 bolts (not supplied) for this model.