background image

using the sleep function

u

  

While unit is on, press the SLEEP button on the remote control. The unit display will show SLEEP and “90” for 

approximately 5 seconds, indicating 90 minutes audio playback before the unit automatically powers off.  

v

  

To select desired time, press SLEEP button repeatedly to display time in 10 minute increments descending from 

90 to 10 minutes. Pause at the desired duration. After 5 seconds the duration time will disappear from the 
display and “SLEEP” will appear on the display.   

notes:

  To 

VIEW THE REMAINING 

SLEEP time, press the SLEEP button once.

To 

CANCEL THE SLEEP 

function, repeatedly press the SLEEP button until “OFF” appears on the display.

setting the timer

u  

With the unit off, press and hold the TIMER button until the TIMER ON hour blinks in the display.

v

  

Within a few seconds, press the SKIP UP 

+

 or SKIP DOWN 

 button to set the TIMER ON hour.  Then press the TIMER 

button again to confirm. Repeat to set the TIMER ON minute.

w

  

Press the SKIP UP 

+

 or SKIP DOWN 

 button to set the desired mode (BT, Tuner, CD). Then press the TIMER button 

again to confirm.

notes:

 To 

CANCEL THE TIMER, 

unit must be in POWER OFF mode. Press the TIMER button and "Timer" will disappear

from display.  To 

STOP THE TIMER

, press the "STANDBY" button.

If you want to use your iPod or CD as the source for timer fuction, please make sure your iPod or iPhone is docked correctly
or a CD is loaded properly in the CD compartment.

Summary of Contents for Ci302





















Reviews: