using the FM radio
u
Turn on the unit by pressing the STANDBY button.
v
If you are not already in TUNER mode, press the MODE button and select Tuner mode.
w
If the FM station you have selected is broadcasting in stereo, “STEREO” will appear in the display. To choose
between stereo and mono palyback, press the STEREO / MONO button on the remote.
x
Repeatedly press the SKIP UP
+
button or the SKIP DOWN
–
button to manually advance the frequency on the
display up or down until the desired frequency appears.
y
For
AUTO TUNING
, press and hold the SKIP UP
+
button or the SKIP DOWN
–
button until the frequency in the
display starts to scan and then release; the tuner will search and then stop on the next strong station signal it finds.
Repeat this step until the desired frequency appears on the display.
note:
Unravel and extend the FM wire antenna for best reception.
setting radio presets
u
Follow the steps in the previous section to tune a station. Press the PROGRAM / CLOCK SET button; “MEM” will
appear in the display and “01” (if no presets have ever been set) will blink in the display.
v
Within five seconds, press the PRESET
+
or PRESET
–
button to select a desired preset number (01-20).
w
Press the PROGRAM / CLOCK SET button again to confirm the setting and the station will be saved into memory.
x
Repeat these steps for up to 20 presets, as desired.
y
For
AUTO PRESETS,
press and hold the PROGRAM / CLOCK SET button, “MEM” and "AUTO" will appear in the
display, the station will automatically be saved into memory (from Pr 01 to Pr 20).
