Capbran Magic Bullet, User Manual

Page: 7 / 11

Using the Magic Bullet
®
“Lock-on” mode:
For hands-free operation,
press down and gently turn
the cup clockwise until the
tabs lock under the lip of the
motor base. Once you are in
lock-on mode, the motor will
run continually (do not run for
longer than a minute!). To stop
blending, simply twist the cup
counter-clockwise to release
pressure on the tabs.
Storing
leftovers in the
Magic Bullet
®
cups
The Magic Bullet
®
includes Stay
Fresh Resealable lids that twist
directly onto your Magic Bullet
®
cups, allowing you to prep food
ahead of time, keep leftovers
fresh, or take your meal on the
go without dirtying an extra
storage container.
Load the ingredients into the cup
(do not exceed the MAX line)
Line up the tabs on the cup and
with the tabs on the motor base.
Press the cup down onto the
base to turn on the machine.
Here’s how it works:
The Magic Bullet
®
will blend for
as long as you press the cup
down onto the motor base. To
stop blending, simply release
pressure on the cup.
Twist on the cross blade
until the blade and cup are
tightly sealed.
1
3
2
Using the Magic Bullet
®
is as easy as 1, 2, 3:
C AUTIO N:
Before using the cross blade,
check the gasket to make sure it is
not damaged and it is completely
seated in the cross blade unit before
each use.
Never put your hands or utensils
near the moving cross blades and
never use your hands or utensils to
press the activator buttons down
while the motor base is plugged in.
IF THE CROSS BLADE STOPS
SPINNING WHILE IN LOCK ON
MODE, IMMEDIATELY UNPLUG THE
MAGIC BULLET
®
. Hard ingredients
like carrots or celery can get stuck
in the cross blade and stop it from
turning. If this happens, UNPLUG
THE MAGIC BULLET
®
RIGHT AWAY.
Remove the blade/cup assembly
from the motor base, and give
ingredients a good shake to unblock
the cross blade. If the cross blade
still remains obstructed, twist the
cross blade attachment off of the cup
and carefully spin the metal blades
using a utensil (not your fi ngers) to
release the blockage. Reattach the
cross blade to the cup, plug in the
Magic Bullet
®
and try again. It should
spin normally.
NEVER RUN THE MAGIC BULLET
FOR MORE THAN ONE MINUTE
AT A TIME, AS IT CAN CAUSE
PERMANENT DAMAGE TO THE
MOTOR. If the motor stops working,
unplug the motor base and let it cool
for a few hours before attempting
to use it again. Your Magic Bullet
®
has an internal thermal breaker that
shuts the unit off when it overheats.
Letting the thermal breaker cool
down should allow it to reset.
12 12 11