6
Auto switch off
The hob will automatically switch off when you did not set cooking time, forgot to switch off the hob, and
did not operate the hob at all.
CONTROL PANEL WARNINGS
Residual heat indicator
The hob is fitted with a residual heat indicator for each cooking zone.
These indicators alert the user when cooking zones are still hot.
If the display shows , the cooking zone is still hot.
If the residual heat indicator of a given cooking zone is lit, that zone can be used ,for example,
to keep a dish warm or to melt butter.
When the cooking zone cools down, the display goes off.
Incorrect or missing pot indicator
If you are using a pot that is not suitable, not correctly positioned or not of the correct
dimensions for your induction hob, the message “E0” will appear in the display (see figure
at side).
If no pot is detected within 120 seconds, the hob switches off.
TECHNICAL INFORMATION
Voltage: 220 - 240 V 50/60 Hz
Model: CZ-I62
Max. power: 4800W
CLEANING
Do not use steam cleaners.
Before cleaning, make sure the cooking zones are switched off and that the residual heat
indicator (“H”) is not displayed.
IMPORTANT: Do not use abrasive sponges or scouring pads. Their use could eventually ruin the glass.
After each use, clean the hob (when it is cool) to remove any deposits and stains due to food residuals.
Sugar or foods with a high sugar content damage the hob and must be immediately removed.
Salt, sugar and sand could scratch the glass surface.
Use a soft cloth, absorbent kitchen paper or a specific hob cleaner (follow the Manufacturer’s
instructions).
