Canyon TWS-6, Quick Start Manual

Page: 17 / 122

16
Switching on the game mode (Fig. J) . Press and hold the touch button (9)
of the right earphone for 2 seconds.
Resetting the pairing of the earphones to the device
Take the earphones out of the case. Press and hold the touch buttons (9) of
both earphones simultaneously for 4 seconds to reset the pairing to the
device. Place the earphones into the charging case. Then repeat the process
of pairing the earphones to a new device
(Fig. H) .
Turning off the earphones (Fig. G) . To turn off put the earphones into the
charging case or press and hold the touch button (9) for up to 5 seconds. Also,
if there is no connection to the device for more than 5 minutes, the earphones
outside the charging case will turn off automatically.
SAFETY INSTRUCTIONS
WARNING!
Set the volume to the minimum level before using the earphones
This will help to avoid hearing damage due to sudden exposure to sound at
maximum volume. Do not use earphones while driving. Protect from high
humidity, water and dust, heat and direct sunlight. Do not drop, disassemble,
or attempt to repair yourself. Clean off dirt with a soft, dry cloth without the use
of detergents.
17 / 122 16 / 120 17 / 122 16 / 120 17 / 122