![background image](http://html.mh-extra.com/html/canyon/sb-12/sb-12_quick-manual_493985003.webp)
turn it on, activate bluetooth on your smartphone,
download and install Canyon Smart Watch application
Canyon Life by scanning the QR code below, open
Canyon Life app->press ”Setup”->”Pair device”->”
Start”-> choose your watch from pair device list
(SB12) -> press ”ADD DEVICE” and you will see
Device successfully connected. Use the application
to apply needed settings: turn on periodic heart rate
measurement, fill in your body parameters, select
apps that you want to receive notifications from, etc.
Scan this QR code to
download and install
the application Сanyon Life:
If the actions from above-mentioned list do not help,
please contact support service at Canyon web-site:
http://canyon.eu/ask-your-question/
Safety Instructions
Read and follow all instructions before
usage of this device.
1. Protect the device from excessive amount of
water:
this smartwatch can be immersed into water
for up to a maximum depth of 1.5m underwater for up
to thirty minutes. It’s forbidden to use it for diving.
2. Protect the device from heat:
do not install heating
devices near it, and do not expose to direct sunlight
during hot season for a long time.
3. Protect the device from smashing:
avoid dropping
the device from over 0,5m to hard surfaces.
Troubleshooting
EN
EN
Problem
Solution
Your
smartwatch
doesn’t turn
on
Make sure that it’s fully charged.
Then press and hold the round
button on the front side of the watch
body. If nothing helps, please contact
your shop of purchase for warranty
support.
Your
smartwatch
isn’t detected
by a
smartphone
Make sure that you’ve activated
Bluetooth, GPS, Location Services
with high presicion, WiFi on your
smartphone
Problem
Solution
Your
smartwatch
is detected
by a
smartphone,
but fails to
connect
Turn the smartwatch off and then turn
it back on.
Download extended functional guide by the link:
https://canyon.eu/files/manuals/quickquides/
smartwatches/functional-guide.pdf