CanyCom S100 Operator'S Manual Download | Manualshive

Page: 46 / 66

background image

- 40 -

7

Maintenance

Charging

● Always remove the battery from the machine before charging it. Failure to do

this will cause damage to electrical components and to the wiring.

● When connecting cables to the battery, use the correct (+) and (-) terminals.

Reversing connections will blow the fuse and prevent charging.

● For safety, always disconnect the (-) terminal first, and connect the (+) terminal

first. Disconnecting or connecting in the opposite order may cause a short
circuit.

● When reinstalling the battery, connect the (+) and (-) to their original positions.

Avoid contact between terminals and other surrounding parts.

The rapid charging method is a method of charging with a large current in
a short time to  partially compensate  for battery  discharge.  This method is
used in emergencies.   After completing operations, perform compensation
charging quickly  and  correctly. If compensation charging is not performed,
the battery life will be greatly reduced.

1. Remove the battery.

2. Charge the battery according to the instructions

given in the operation manual for the charger.

«
...
44
45
46
47
48
...
»

Summary of Contents for S100



































































Reviews:

No comments

Related manuals for S100

Brand: Haklift Pages: 53

Brand: Westfalia Pages: 10

Brand: MATLOCK Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands